HINT
Before using your phone, fully charge the Nickel- Cadmium battery pack for
7) Attach the desktop stand to the base.
8)Set the base on a desk or tabletop and place the handset into the base
as shown. Then, raise the antenna to a vertical position.
CAUTION
Place the power cord so that it does not create a trip hazard or where it could become chafed and create a fire or electrical hazard.
WALL INSTALLATION
▼Standard wall plate mounting
This phone can be mounted on any standard AT&T or GTE wall plate.
1)Remove the wall mount adapter from the notches at the top of
the base.
2)Rotate the wall mount adapter
180 degrees and snap it into place at the bottom of the base.
4
