Uniden EXT1265 Use To move the pointer between Auto Talk On or, You subscribe Press, Area code

4 Use	•	and ª	to move the pointer between “Auto Talk On” or
“Auto Talk			Off”. For “CIDCW”, choose “CIDCW On” ,“CW Options”
or “CIDCW Off” depending upon the type of service to which
you subscribe.
Press	int’cm/select		to make your selections and a confirmation tone

will sound. To complete the setting, make sure to return the handset to the base.

Entering your Area Code

If you enter a 3-digit area code number in the “Area Code” option, your local area code does not appear in Caller ID messages. For calls received from outside your local area code, you will see a full 10-digit number.

1	When the phone is in the standby mode, press menu .
2	Press	ª	to move the pointer to “Caller ID Setup”.
	Then press int’cm/select to select. The Caller ID setting screen appears.
3	Use	ª to move the pointer to “Area Code”, then press int’cm/select .
4	Use the number keypad (0 to 9) to enter the 3-digit			Area Code
5	area code.
	Press	int’cm/select , and a confirmation tone will sound.

note

•If your calling area requires 10-digit dialing, do not program this option.

•When the area code has already been stored in memory, the stored area code will be displayed.

To change it, use the delete/channel and number keypad to enter the new area code.

•To complete the setting, press int’cm/select then return the handset to the base unit.

C A L L E R I D O P T I O N S

C A L L E R I D O P T I O N S [ 13 ]