Uniden quick start Connecting Your GPS105, Back Panel

2CONNECTING YOUR GPS105

EXTERNAL SPEAKER JACK

BACK PANEL

UHF ANTENNA CONNECTOR

GPS ANTENNA CONNECTOR

DC POWER CORD

Microphone Socket

i.Remove fuse from fuse holder along power lead.

ii.Connect 13.8V supply to the power lead making sure positive is applied to the red wire and ground to the black wire.

iii.Connect the UHF Antenna with PL259 fitting (not included).

iv.Connect the GPS Internal Antenna.

v.Make sure the Power Switch knob is OFF (see Controls page 4).

vi.Re-insert the fuse into the fuse holder.

vii.Connect microphone plug to microphone socket.

An optional External Speaker may be connected via the External Speaker Jack. When the external speaker is connected the internal speaker is automatically disconnected.

The connecting wire must use a 3.5mm miniature plug.

iii