UHF CB - OPERATION
TO OPERATE IN DUPLEX MODE (REPEATERS)
The Duplex function enables you to access local repeater stations. You can only activate Duplex from
UHF CB Repeaters are used to retransmit or relay your signal.
Repeaters will extend the range of your radio and overcome the shielding effect caused by solid obstructions.
Contact a retailer for a list of repeaters available in your area.
Operation with the aid of a Repeater
To turn DUPLEX ON/OFF:
1.Select the channel of the repeater in your area (CH01 - CH08).
2.Press & hold MENU .
3.Scroll 
to highlight DUPLEX.
4.Press ENT .
5. | Press |
| or | to select ON or OFF as desired. |
6. | Press | ENT | to confirm selection. | |
'DUPLEX' will appear when a duplex channel is used only if duplex is turned ON.
If DUPLEX is selected from the MENU options when the channel is not from CH01 - CH08, an error tone sounds.
9
