JVC RX-7032VSL manual Press FM/AM to select the band, Selecting the FM Reception Mode

To tune in to a preset station

On the front panel:

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

1. Press FM or AM to select the band.

The last received station of the selected band is tuned in.

2.Press FM/AM PRESET 5 or ∞ until you find the channel you want.

•Pressing FM/AM PRESET 5 increases the number.

•Pressing FM/AM PRESET ∞ decreases the number.

From the remote control:

1 2 3

4 5 6

7/P 8 9

10/0 0 +10

1. Press FM/AM to select the band.

The last received station of the selected band is tuned in.

•Each time you press the button, the band alternates between FM and AM (MW).

2.Press the 10 keys to select a preset channel number.

•For channel number 5, press 5.

•For channel number 15, press +10, then 5.

•For channel number 20, press +10, then 10/0.

•For channel number 30, press +10, +10, then 10/0.

Note:

When you use the 10 keys on the remote control, be sure that they are activated for the tuner, not for the CD and others. (See page 40.)

Selecting the FM Reception Mode

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

When an FM stereo broadcast is hard to receive or noisy, you can change the FM reception mode while receiving an FM broadcast.

•You can store the FM reception mode for each preset station (see page 20).

While listening to an FM station, press FM MODE.

•Each time you press the button, the FM reception mode alternates between “AUTOMUTING” and “MODE MONO.”

AUTOMUTING: Normally select this.

When a program is broadcasted in stereo, you will hear stereo sound; when in monaural, you will hear monaural sounds. This mode is also useful to suppress static noise between stations. The AUTO MUTING indicator lights up on the display. (Initial setting)

MODE MONO: Select this to improve the reception (but stereo effect will be lost).

In this mode, you will hear noise while tuning in to the stations. The AUTO MUTING indicator goes off from the display. (The STEREO indicator also goes off.)

Note:

When you use the FM MODE on the remote control, be sure that it is activated for the tuner, not for the CD and others. (See page 40.)

Receiving FM Stations with RDS

RDS (Radio Data System) allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

•When tuned in to an FM station which provides the RDS service, the RDS indicator lights up on the display.

With the receiver, you can receive the following types of RDS signals.

PS (Program Service) : Shows commonly known station names

PTY (Program Type) : Shows types of broadcast programs

RT (Radio Text) : Shows text messages the station sends

Enhanced Other Networks

:Provides the information about the types of the programs sent by other RDS stations than the one being received.

21