COMPU LINK Remote Control System

The COMPU LINK remote control system allows you to operate JVC’s audio components through the remote sensor on the receiver.

To use this remote control system, you need to connect JVC’s audio components through the COMPU LINK (SYNCHRO) jacks (see below) in addition to the connections using cables with RCA pin plugs (see pages 10).

Make sure that the AC power cords of these components are unplugged before connection. Plug the AC power cords only after all connections are complete.

CD player

Cassette deck

or

CD recorder

COMPU LINK-4

(SYNCHRO)

Notes:

There are four versions of COMPU LINK remote control system. This receiver is equipped with the fourth version—COMPU LINK-4. This version is added systematic operations with the CD recorder to the previous version—COMPU LINK-3.

If your audio component has two COMPU LINK jacks, you can use either one. If it has only one COMPU LINK jack, connect it so that it is the last item in the series of components.

To operate the target component using the COMPU LINK remote control system, set the source name correctly if required.

(See page 18.)

Refer also to the manuals supplied with your audio components.

This remote control system allows you to use four functions listed below.

Remote Control through the Remote Sensor on the Receiver

You can control the connected audio components through the remote sensor on the receiver using this remote control. Aim the remote control directly at the remote sensor on the receiver. For details, see pages 40 and 41.

Automatic Source Selection

When you press the play (3) button on a connected component or on its own remote control, the receiver automatically turns on and changes the source to the component. On the other hand, if you select a new source on the receiver or on the remote control, the selected component begins playing immediately.

In both cases, the previously selected source continues playing without sound for a few seconds.

You cannot use the COMPU LINK remote control system to operate the MD recorder.

Automatic Power On/Off (Standby)—only possible with the COMPU LINK-3 and COMPU LINK-4

The connected components turn on and off (standby) along with the receiver.

When you turn on the receiver, one of the connected components will turn on automatically, depending on which component has been previously selected.

When you turn off the receiver, the connected components will turn off (standby).

Synchronized Recording

Synchronized recording means the cassette deck starts recording as soon as a CD begins playing.

To use synchronized recording, follow these steps:

1.Put a tape in the cassette deck, and a disc in the CD player.

2.Press the record () button and the pause (8)

button on the cassette deck at the same time.

This puts the cassette deck into recording pause.

If you do not press the record () button and pause (8) button at the same time, the synchronized recording feature will not operate.

3. Press the play (3) button on the CD player.

The source changes on the receiver, and as soon as play starts, the cassette deck starts recording. When the play ends, the cassette deck enters recording pause, and stops about 4 seconds later.

Notes:

During synchronized recording, the selected source cannot be changed.

If the power of any component is shut off during synchronized recording, the COMPU LINK remote control system may not operate properly. In this case, you must start again from the beginning.

39

Page 42
Image 42
JVC RX-7032VSL Compu Link Remote Control System, Press the play 3 button on the CD player, Automatic Source Selection

RX-7032VSL specifications

The JVC RX-7032VSL is a versatile and powerful audio receiver that caters to both audiophiles and casual listeners alike. Renowned for its robust build quality and exceptional sound performance, this model blends advanced audio technologies with user-friendly features, making it a solid choice for home audio setups.

At the heart of the RX-7032VSL is its impressive amplifier section, delivering a substantial output power of up to 100 watts per channel. This ensures that even the most demanding speakers can be driven effortlessly, producing rich audio clarity and dynamic soundscapes that elevate your listening experience. The receiver supports various speaker configurations, enabling optimal flexibility in setup.

One of the standout features of the JVC RX-7032VSL is its incorporation of Dolby Pro Logic II technology, which enhances stereo sound and creates a more immersive surround experience. This technology allows users to enjoy stereo sources in a multi-channel format, enriching movie and music playback with enhanced spatial audio depth. Additionally, the unit includes built-in DSP modes that offer preset sound profiles tailored for different genres and media types, allowing users to easily switch modes depending on their listening preferences.

Connectivity is another forte of the RX-7032VSL. The receiver boasts multiple audio inputs, including standard RCA and digital optical and coaxial options. This broad range of inputs allows users to connect various devices, from CD players and turntables to gaming consoles and media streaming devices. Moreover, the unit is equipped with dual-zone capabilities, enabling audio playback in separate areas of your home, expanding its functionality for entertainment purposes.

The design of the RX-7032VSL emphasizes both aesthetics and practicality. Its sleek, modern appearance features an intuitive front panel with easy-to-read displays and controls for effortless operation. Users can navigate settings and inputs quickly, enhancing the overall usability of the product.

In summary, the JVC RX-7032VSL is a feature-rich audio receiver that combines powerful amplification, advanced surround sound processing, and extensive connectivity options. Whether you're watching movies, listening to music, or gaming, it’s designed to provide an extraordinary audio experience that meets a variety of needs. With its blend of performance, flexibility, and ease of use, the RX-7032VSL certainly stands out in the competitive landscape of home audio receivers.