Pioneer VSX-919AH-S Operating range of remote control unit, 12Remote control LED, 13  SOURCE

Controls and displays 02

9AUDIO – Changes the audio or channel on DVD or BD discs.

DISPLAY – Switches between named station presets and radio frequencies.

CH +/– – Use to select channels for DVD/ DVR units.

10REMOTE SETUP – Use to input the preset code when making remote control settings and to set the remote control mode (page 72).

TV CTRL – Use this button to set preset code of your TV’s manufacturer when controlling TV (see Selecting preset codes directly on page 72 for more on this).

11MULTI-ZONE operation selector switch Switch to perform operations in the main zone and sub zone (page 69).

12Remote control LED

Lights when a command is sent from the remote control (page 72).

13  SOURCE

Press to turn on/off other components connected to the receiver (see page 72 for more on this).

14MASTER VOLUME +/– Use to set the listening volume.

15MUTE

Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).

16RECEIVER

Switches the remote to control the receiver (used to select the white commands above the number buttons (A.ATT, etc.)). Also use this button to set up surround sound.

Operating range of remote control unit

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver’s remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control unit.

30°

30°

7 m

13

En