Pioneer VSX-919AH-S manual About the audio connection, About the video converter

03Connecting your equipment

About the audio connection

There are several types of audio input and output terminals on this receiver. The receiver selects the first available signal in the following order:

	Types of cables and	Transferable
	terminals	audio signals
	HDMI	HD audio
priority
signal	Digital (Coaxial)	Conventional

About the video converter

The video converter ensures that all video sources are output through all of the MONITOR VIDEO OUT jacks. The only exception is HDMI: since this resolution cannot be downsampled, you must connect your monitor/TV to the receiver’s HDMI video outputs when connecting this video source.1

If several video components are assigned to the same input function (see The Input Setup menu on page 40), the converter gives priority to HDMI, component, then composite (in that order).

Sound		digital audio
	Digital (Optical)
	RCA (Analog)	Conventional
	(White/Red)	analog audio

• With an HDMI cable, video and audio

	Terminal for
	connection with
qualityerictup	source device
		HDMI IN
High	PB	PR	Y
		VIDEO IN
	COMPONENT
		VIDEO IN

Terminal for

connection with TV

monitor

HDMI OUT

PB PR Y

COMPONENT VIDEO

MONITOR OUT

VIDEO

MONITOR OUT

signals can be transferred in high quality

over a single cable.

Video signals can be output

CAUTION

•When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.

•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Note

1• If the video signal does not appear on your TV or flat screen TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be converted. In this case, try switching Digital Video Conversion (in Setting the Video options on page 66) OFF.

•The signal input resolutions that can be converted from the component video input for the HDMI output are 480i/ 576i, 480p/576p, 720p and 1080i. 1080p signals cannot be converted.

•Only signals with an input resolution of 480i/576i can be converted from the component video input for the

composite monitor output.

22

En