Pioneer VSX-919AH-S Confirm your selected setup option, 4Adjust the level of each channel using 

11The system and the other setup

3 Confirm your selected setup option.

The test tones will start after you press ENTER.
		4a3.Channel Level
		A/V RECEIVER
		CAUTION
		Loud test tones will be output.
		Please wait...**
	Exit	Cancel

Speaker Distance

For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.

1Select ‘Speaker Distance’ from the Manual SP Setup menu.

4Adjust the level of each channel using /

.

If you selected MANUAL, use / to switch speakers. The AUTO setup will output test tones in the order shown on-screen:

		4a3.Channel Level
		A/V RECEIVER
MCACC : M1.MEMORY 1
L	:	0.00 dB
C	:	0.00 dB
R	:	0.00 dB
SR	:	0.00 dB
SBR	:	0.00 dB
SBL	:	0.00 dB
SL	:	0.00 dB
SW	:	0.00 dB
Exit		Finish

Adjust the level of each speaker as the test tone is emitted.1

5When you’re finished, press RETURN.

You will return to the Manual SP Setup menu.

4a.Manual SP Setup

A/V RECEIVER

1.Surr Back System

2.Speaker Setting

3.Channel Level

4.Speaker Distance

5.X-Curve

			4a4.Speaker Distance
			A/V RECEIVER
	MCACC : M1.MEMORY 1
	L	:	3.61m
Exit	C	:	3.69m
	R	:	3.67m
	SR	:	2.74m
	SBR	:	5.77m
	SBL	:	5.13m
	SL	:	2.26m
	SW	:	3.54m
	Exit		Finish

2Adjust the distance of each speaker using

/.

You can adjust the distance of each speaker in 0.01 m increments.

3When you’re finished, press RETURN.

You will return to the Manual SP Setup menu.

Tip

•You can change the channel levels at any

time by press RECEIVER , then press CH LEVEL, and then using / on the remote control.

Tip

•For best surround sound, make sure the surround back speakers are the same distance from the listening position.

Note

1• If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C-weighting/slow reading).

• The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

96

En