Pioneer VSX-919AH-S 10The Advanced MCACC menu Checking MCACC Data, Speaker Setting, Channel Level

10The Advanced MCACC menu

Checking MCACC Data

At the procedure of Automatically setting up for surround sound (Auto MCACC) on page 37, the procedure of Automatic MCACC (Expert) on page 77 or after fine-adjusting at Manual MCACC setup on page 81, you can check your calibrated settings using the GUI screen.

1 Press RECEIVER , then press HOME MENU.

AGraphical User Interface (GUI) screen appears on your TV. Use /// and ENTER to navigate through the screens and select menu items. Press RETURN to confirm and exit the current menu.

2Select ‘MCACC Data Check’ from the

HOME MENU.

HOME MENU

A/V RECEIVER

1. Advanced MCACC

2. MCACC Data Check

3. Data Management

4. System Setup

2.MCACC Data Check

	A/V RECEIVER
	a. Speaker Setting
	b. Channel Level
	c. Speaker Distance
	d. Standing Wave
Exit	e. Acoustic Cal EQ	Return
	Exit	Return

3Select the setting you want to check.

•Speaker Setting – Used to check the settings of the speaker systems. See Speaker Setting below for more on this.

•Channel Level – Used to check the output level of the different speakers. See Channel Level below for more on this.

•Speaker Distance – Used to check the distance to the different speakers. See Speaker Distance on page 89 for more on this.

•Standing Wave – Used to check the standing wave control filter settings. See Standing Wave on page 89 for more on this.

•Acoustic Cal EQ – Used to check the calibration values of the listening environment’s frequency response. See Acoustic Cal EQ on page 89 for more on this.

4Press RETURN to go back to MCACC Data Check menu, repeating steps 2 and 3 to check other settings.

5When you’re finished, press RETURN. You will return to the HOME MENU.

Speaker Setting

Use this to display the speaker size and number of speakers. See Speaker Setting on page 94 for more on this.

1Select ‘Speaker Setting’ from the MCACC Data Check menu.

		2a.Speaker Setting
		A/V RECEIVER
Front	:	LARGE
Center	:	SMALL
Surr	:	SMALL
SB	:	SMALL x 2
SW	:	YES
Exit		Return

2Select the channel you want to check. Use / to select the channel. The corresponding channel on the layout diagram is highlighted.

Channel Level

Use this to display the level of the various channels. See Channel Level on page 95 for more on this.

88

En