Pioneer VSX-919AH-S manual KURO LINK KURO LINK Setup, Setting the PQLS function

KURO LINK

KURO LINK Setup

You must adjust the settings of this receiver as well as KURO LINK-compatible connected components in order to make use of the KURO LINK function. For more information see the operating instructions for each component.

1Press RECEIVER , then press Home Menu.

2Select ‘System Setup’, then press ENTER.

3Select ‘Other Setup’, then press ENTER.

4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup	4d1.KURO LINK Setup
5. Volume Limit Setup
6. Remote Control Mode Setup		A/V RECEIVER
7. Flicker ReductionKURO LINK		:	ON
Display Power Off		:	YES
Exit			Return

Exit Finish

4Select the ‘KURO LINK’ setting you want. Choose whether to set this unit’s KURO LINK function ON or OFF. You will need to set it to ON to use the KURO LINK function.

When using a component that does not

support the KURO LINK function, set this to OFF.

•ON – Enables the KURO LINK function. When this unit’s power is turned off and you have a supported source begin playback while using the KURO LINK function, the audio and video output from the HDMI connection are output from the flat screen TV.

•OFF – The KURO LINK is disabled. Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

07

5Select the ‘Display Power Off’ setting you want.

If the TV’s power is turned off while using the KURO LINK function, the receiver’s power is also turned off (all power off function). This function can be disabled.

•YES – The all power off function is enabled. The receiver’s power turns off together with the TV’s power.

This function only works when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.

•NO – The all power off function is disabled. The receiver’s power is not affected when the TV’s power is turned off.

6When you’re finished, press HOME MENU. You will finish to HOME MENU.

Setting the PQLS function

PQLS (Precision Quartz Lock System) is a digital audio signal transfer control technology using the KURO LINK function. It offers higher- quality audio playback by controlling audio signals from the receiver to a PQLS compatible player, etc. This enables removing jitter that has a negative effect on the quality of the sound and is generated upon transmission.

This function is activated when KURO LINK is set to ON.

•Press RECEIVER , then press PQLS to select PQLS setting.

The setting is displayed on the front panel display.

•PQLS AUTO – PQLS is enabled. A

precision quartz controller in this receiver eliminates distortion caused by timing errors (jitter), giving you the best possible digital-to-analog conversion from audio CD sources when you use the HDMI interface. This is valid as an HDMI function for PQLS- compatible players.

•PQLS OFF – PQLS is disabled.

61

En