Pioneer VSX-919AH-S manual Remote Control Mode Setup, Flicker Reduction Setup

11The system and the other setup

Remote Control Mode Setup	Flicker Reduction Setup
• Default setting: 1	• Default setting: 4

This sets this receiver’s remote control mode to prevent erroneous operation when multiple units of the receiver are being used.1

1Select ‘Remote Control Mode Setup’ from the Other Setup menu.

4d.Other Setup

A/V RECEIVER

1.KURO LINK Setup

2.Multi Ch In Setup

3.ZONE Audio Setup

4.Power ON Level Setup

5.Volume Limit Setup

6.Remote Control Mode Setup

7.Flicker Reduction Setup

4d6.Remote Control Mode Setup
A/V RECEIVER
Remote Control Mode :	1
Exit	Return
	OK
Exit	Cancel

2Select the Remote Control Mode setting you want.

3Select “OK” to change the remote control mode.

4Follow the instructions on the screen to change the remote control’s setting.

See Operating multiple receivers on page 72.

5When you’re finished, press RETURN. You will return to the Other Setup menu.

The GUI screen’s resolution can be increased. If you feel the GUI screen is hard to see, try changing this setting. Note that the resolution in this setting only affects the GUI screen; it has no influence on the video output.

1Select ‘Flicker Reduction Setup’ from the Other Setup menu.

4d.Other Setup
A/V RECEIVER
1. KURO LINK Setup
2. Multi Ch In Setup
3. ZONE Audio Setup
4. Power ON Level Setup
5. Volume Limit Setup
6. Remote Control Mode Setup
7. Flicker Reduction Setup
4d7.Flicker Reduction Setup
	A/V RECEIVER
Flicker Reduction	:	4
Exit

Exit Finish

2Select the Flicker Reduction setting you want.

3When you’re finished, press RETURN. You will return to the Other Setup menu.

Note

1 If you change this receiver’s setting, also change the setting on the remote control.

100

En