Pioneer VSX-919AH-S manual USB interface, Additional information, Symptoms, Causes, Remedies

Additional information 12

USB interface

Symptoms Causes Remedies

The folders/files stored on a USB memory device are not displayed.

The folders/files are currently stored	Store the folders/files in the FAT region.
in a region other than the FAT (File
Allocation Table) region.
The number of levels in a folder is	Limit the maximum number of levels in a
more than 8.	folder to 8 (page 46).
There are more than 30 000 folders/	Limit the maximum number of folders/files

files stored in a USB memory device. stored in a USB memory device to 30 000

	(page 46).
The audio files are copyrighted.	Copyrighted audio files stored on a USB
	memory device cannot be played back
	(page 46).

AUSB memory device is not recognized.

The USB memory device does not	Try using a USB memory device compatible
support the mass storage class	with the mass storage class specifications.
specifications.	Note that there are cases where even the
	audio files stored on a USB memory device
	compatible with the mass storage class
	specifications are not played back on this
	receiver (page 46).
	Connect the USB memory device and
	switch on this receiver (page 34).

A USB hub is currently being used. This receiver does not support a USB hub (page 46).

This receiver recognizes the USB	Switch off and on again this receiver.
memory device as a fraud.

AUSB memory device is connected and displayed, but the audio files stored on the USB memory device cannot be played back.

Some formats of a USB memory	Check whether the format of your USB
device, including FAT 12, NTFS, and	memory device is either FAT 16 or FAT 32.
HFS, cannot be played back on this	Note that the FAT 12, NTFS, and HFS
receiver.	formats cannot be played back on this
	receiver (page 46).
The file format cannot be properly	See the list of file formats that can be played
played back on this receiver.	back on this receiver (page 49).

If the problem is not solved after the troubleshooting above, if the screen freezes unexpectedly or if the buttons on the remote control or front panel stop working completely, do the following:

•Press  STANDBY/ON on the front panel to turn off the power, then turn the power back on.

•If the power cannot be turned off, press and hold  STANDBY/ON on the front panel for over 10 seconds. The power will turn off. (In this case, the various settings made on the receiver may be cleared.)

111

En