Pioneer VSX-919AH-S manual 04Basic Setup Chapter, Switching the speaker impedance

04Basic Setup

Chapter 4:

Basic Setup

Switching the speaker impedance

We recommend using speakers of 8 Ω with this system, but it is possible to switch the impedance setting if you plan to use speakers with a 6 Ω impedance rating.

1Switch the receiver into standby.

2While holding down ENTER on the front panel, press  STANDBY/ON.

The display shows RESET  NO .

Use TUNE +/– (or / on the remote control) to select SPEAKER  8Ω , and then use PRESET +/– (or /on the remote control) to select SPEAKER 8Ω or SPEAKER 6Ω.

•SPEAKER 8Ω – Use this setting if your speakers are rated at 8 Ω or more.

•SPEAKER 6Ω – Use this setting if your speakers are rated at 6 Ω.

Changing the TV format setting

If the Graphical User Interface screen is not displayed correctly, it may be that the TV system is set incorrectly for your country or region.

1Switch the receiver into standby.

2While holding down ENTER on the front panel, press  STANDBY/ON.

The display shows RESET  NO .

Use TUNE +/– (or / on the remote control) to select PAL/NTSC  PAL , and then use PRESET +/– (or /on the remote control) to select PAL or NTSC.

Changing the frequency step

If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region. Here’s how to switch the setting:

1Switch the receiver into standby.

2While holding down ENTER on the front panel, press  STANDBY/ON.

The display shows RESET  NO .

Use TUNE +/– (or / on the remote control) to select FREQ STEP  9k , and then use PRESET +/– (or /on the remote control) to select 9k or 10k.

Changing the OSD display language (OSD Language)

The language used on the Graphical User Interface screen can be changed.

•The explanations in these operating instructions are for when English is selected for the GUI screen.

1Press RECEIVER on the remote control, then press HOME MENU.

AGraphical User Interface (GUI) screen appears on your TV. Use /// and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu.

36

En