Using the receiver
Getting into the operating menu of the setup menu
Press the SET button to get from the start display into the operating menu. The first menu “LOCK” flashes on the display.
Selecting a menu
Press the / rocker button (UP/DOWN) to select the menu you would like to adjust the setting.
The current setting that can be adjusted flashes on the display.
The setup menu comprises six menus that can be chosen in the fol- lowing order:
Display Function of the menu
LOCK | Activating/deactivating the lock mode (see page 20) |
TUNE
Setting a receiving frequency for the channels (see page 20)
and locking channles for the user (see page 20)
SQELCH Adjusting the squelch threshold (see page 21)
LTD
Acitvating/deactivating the limiter at the headphone output (see page 22)
Displaying the revision of the firmware* (see see “SW-
COPY
*software stored on a chip in the device
Setting several receivers to the same channel and receiver settings simultaneously (see “COPY” on page 22)
Getting into the setting mode of a menu
Press the SET | button to get into the setting mode of the |
selected menu. |
|
The current setting that can be adjusted flashes on the display.
15
