TP-Link manual TD-W8960N Wireless N ADSL2+ Modem Router User Guide, Manual Setup AP, Wep

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Figure 4-76

4.5.2.2 Manual Setup AP

Follow the instructions below to configure security features of the wireless LAN interface manually. You can set the network authentication method, select data encryption, specify whether a network key is required to authenticate to this wireless network and specify the encryption strength.

Figure 4-77

¾Network Authentication: Select an authentication type from the drop-down list. Options

available are: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK, Mixed WPA2/WPA, and Mixed WPA2/WPA-PSK.

)Note:

For most users, it is recommended to use the default Wireless LAN Performance settings. Any changes made to these settings may adversely affect your wireless network. Under certain circumstances, changes may benefit performance. Carefully consider and evaluate any changes to these wireless settings.

1.WEP

WEP is a basic encryption method offering two levels of encryption, 64-bit and 128-bit encryption. If you select enable from the drop-down list of WEP Encryption, you will see the screen shown as below.

65