TP-Link manual TD-W8960N Wireless N ADSL2+ Modem Router User Guide, ¾ Bridge Restrict

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Figure 4-91

¾AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point and Wireless Bridge.

•Access Point: Select this option to allow wireless stations including AP clients to access.

•Wireless Bridge: Also known as WDS (Wireless Distribution System), it will bridges the wireless stations which also in bridge mode to connect two or more remote LANs.

¾Bridge Restrict:

•Disabled: Select this option to disables wireless bridge restriction, that any wireless bridge will be granted access.

•Enabled: Select this option (as shown below) to enables wireless bridge restriction, please enter the MAC address of the Remote Bridges that you want to connect with, and only these Remote Bridges are granted access.

Figure 4-92

•Enabled (Scan): Select this option to enables wireless bridge restriction, and it will scan the environment for APs that exist around the device. Only those selected AP will be granted access.

•Refresh: Click this button to scan and display the APs.

73