TP-Link TD-W8960N manual Diagnostics, Station info

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

¾Beacon Interval: Enter a value between 20-1000 milliseconds. The Beacon Interval value indicates the frequency interval of the beacon. A beacon is a packet broadcast by the Router to synchronize the wireless network. The default value is 100.

¾Transmit Power: This option will allow you to configure the wireless transmit power. High transmit power will extend the wireless signal range of the device and make the signal transmit more legible. Low transmit power with the smaller wireless signal range that will decrease the probability of interrupt by other Wi-Fi device.

¾WMM (Wi-Fi Multimedia): This function can guarantee the packets with high-priority messages being transmitted preferentially. It is strongly recommended.

4.5.6 Station info

Choose “Wireless”Æ” Station info”, you will see the screen of Wireless-Authenticated Stations setting shown as below.

Figure 4-95

This page shows authenticated wireless stations and their status.

¾MAC: Displays the connected wireless station's MAC address.

¾Associated: Displays whether the wireless station has associated with the access point.

¾Authorized: Displays the information of Authentication.

¾SSID: Displays the connected wireless station's SSID.

¾Interface: Displays the connected wireless station's Interface mode.

4.6 Diagnostics

Choose “Diagnostics”, you will see the Diagnostics screen. This section describes the result of the test for the ENET (Ethernet) Connection, Wireless Connection and ADSL Synchronization. You can refer to the Help menu to get more information about the corresponding test.

76