TP-Link TD-W8960N manual Default Gateway, Static Route

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Figure 4-47

4.4.9.1 Default Gateway

Choose “Advanced Setup”Æ“Routing”Æ“Default Gateway”, you can see the Default Gateway screen, this screen allows you to select a WAN Interface from the drop-down list as the system default gateway.

Figure 4-48

)Note:

If changing the Automatic Assigned Default Gateway from unselected to selected, you have to reboot the Router to get the automatically assigned default gateway.

Default Gateway IP address should be specified since MER Interface is selected when you select the Enable automatic Assigned Default Gateway check box.

4.4.9.2 Static Route

Choose “Advanced Setup”Æ“Routing”Æ“Static Route”. You can see the Static Route screen, this screen allows you to configure the static routes (shown in Figure 4-49). A static route is a pre-determined path that network information must travel to reach a specific host or network.

47