TD-W8960N Wireless N ADSL2+ Modem Router User Guide

Figure 4-14

8.On the next screen you will see the WAN Port Information Table with the new configuration.

Figure 4-15

¾Remove: Select the check box in the table above and then click Remove, the corresponding interface will be deleted in the table.

¾Add: Click the Add button, and you can add a new interface in the next screen.

4.4.2.2ATM-EoA-IPoE

If your ISP provides an IPoE connection and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface:

1.Add a new ATM interface and select EoA option for DSL Link Type (4.4.1.1 ATM interfaces).

23

Page 30
Image 30
TP-Link TD-W8960N manual ATM-EoA-IPoE