TD-W8960N Wireless N ADSL2+ Modem Router User Guide

4.4.11 DSL

Choose “Advanced Setup”Æ“DSL”, you can see the DSL Settings screen, this screen allows you to configure the DSL (shown in Figure 4-56).

Figure 4-56

You can select the modulation type, phone line pair and the capability of Bitswap or SRA. After you set them up, click Save/Apply to save the configurations.

4.4.12 UPNP

Choose “Advanced Setup”Æ“Upnp”, you can Enable or Disable the UPnP (Universal Plug and Play) protocol on the screen.

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join a network, obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a device can leave a network smoothly and automatically when it is no longer in use. UPnP broadcasts are only allowed on the LAN.

52

Page 59
Image 59
TP-Link TD-W8960N manual 11 DSL, Upnp