TP-Link manual TD-W8960N Wireless N ADSL2+ Modem Router User Guide, ATM-EoA-Bridge

TD-W8960N Wireless N ADSL2+ Modem Router User Guide

)Note:

If you select the Enable NAT checkbox, the NAT menu will be added to the Web-based Utility. We will describe the detailed configuration in 4.4.5 NAT.

6.Click the Next button, and select a preferred wan interface as the system default gateway.

Figure 4-18

7.Configure the DNS Server Addresses on the screen as follows.

Figure 4-19

)Note:

If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.

9.On the next screen (as shown Figure 4-14)you will see the detailed settings you’ve made. Please click the Apply/Save button to save these settings.

4.4.2.3ATM-EoA-Bridge

If you want to adopt the Bridge service and you need to use an ATM Interface, follow the steps below to add a WAN service over a selected ATM interface:

26