Tourguide UHF system, System components

The tourguide UHF system

The tourguide UHF system consists of the EK 1038 receiver in com- bination with a transmitter of the evolution wireless series G2. The system offers optimum speech transmission for guided tours and interpretation applications with one or several speakers. The use of RF transmission allows freedom of movement for all members of the group. Due to the possibility of combining the EK 1038 receiver with different transmitters, the system can be optimally adapted to your individual needs.

The system has superb audio quality with an increased signal-to- noise ratio and dynamic range due to the inclusion of Sennheiser’s HDX noise reduction system.

System components

The components of the system are:

yEK 1038 receiver

yBA 2015 accupack

yL 2015 charger

yNT 1 or NT 3 plug-in mains unit

yGP 03 headphones with stereo jack plug

ytransmitter (please specify when ordering)

Page 8

Image 8

Sennheiser LV308, LV307 manual Tourguide UHF system, System components

Contents

Tourguide UHF Page Contents Thank you for choosing Sennheiser Important safety instructions Power source Replacement partsSafety check Overloading Safety instructions for Lithium-Ion rechargeable batteries Do not solder Tourguide UHF system System components Operating controls Special featuresEK 1038 receiver Operation and battery status indication Segments Capacity approx % Battery icon flashing LOW BATRF signal indication Indications Inserting and changing the battery pack/batteries How to properly use the battery pack or the batteriesConnecting the headphones Preparing for use Using the receiver Switching the receiver on/offAdjusting the volume Switching the channel Configure the receiver Menu is given within the chapter The setup menuOperating menu of the receiver Attaching the receiver to clothing Starting the setup menu Function of the buttons in the setup menu Getting into the operating menu of the setup menu Getting into the setting mode of a menuSelecting a menu Software stored on a chip in the device Adjusting a setting Storing a settingCanceling the entry Exiting the setup menu Setup menu of the receiver LOC. OFF LOC. on Adjustment tips for the setup menu Activating/deactivating the lock modeLocking channels for the user Changing the receiving frequencies of the channels Adjusting the squelch threshold Releasing locked channels Copy function Limiting the volume at the headphone outputDisplaying the revision of the firmware Slave Quick charger LED indications Setting up the charger Switching the charger on or offCascading several chargers Do not place the receiver on delicate surfaces Using the charger Care and maintenanceCharging the rechargeable battery BA Compartments As shown Red LED Channel bank system SK 100 G2 / SK 300 G2 / SK 500 G2 Quick charger SKM 100 G2 / SKM 300 G2 / SKM 500 G2 radiomicrophones Delivery includes Inserting and changing the battery Changing the microphone module Using the radiomicrophone Switching the radiomicrophone on/off Muting the radiomicrophone SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitters Inserting and charging the accupack Connecting the microphone/line cable Attaching the microphonesUse the microphone clips Positioning the microphones Using the bodypack transmitter Switching the transmitter on/offMuting the transmitter Play appears on the display panel SKP 100 G2 / SKP 500 G2 plug-on transmitters Microphone input, XLR-3 socket Button UP Unbalanced Plugging the transmitter onto the microphone Betriebs- und Batterieanzeige LC display panel Evolution wireless transmitters G Battery status indicationLC display panel Mute display Pilot display Display backlighting Overview of menus Buttons Exiting the operating menu Working with the operating menuGetting into the operating menu Exit Overview of the operating menu of the transmitters Disply Switching between channel banks Switching between the channels in a channel bankAdjusting the sensitivity Selecting the frequencies to be stored in the channel Switching the phantom powering on/off SKP 500 G2 only Entering a name Loading the factory-preset default settingsSelecting the standard display Exiting the operating menu Activating/deactivating the lock modeActivating/deactivating the pilot tone transmission Troubleshooting Error checklistSet transmitter and receiver to Deactivate the muting function Recommendations and tips For the receiver EKFor the radiomicrophones …for the bodypack transmitters Inherent HDX noise reductionProgress you can hear Accessories and spare parts Quick charger SK 100 G2 / SK 300 G2 / SK 500 G2 bodypack transmitter SKP 100 G2 / SKP 500 G2 plug-on transmitter 2015charger SpecificationsEK 1038 receiver Evolution wireless transmitters G Deep discharge recovery chargeAutomatic security switch-off after 6 h at the latest Plug-in mains units Channel assignment Tune Chan Warranty Manufacturer declarations Weee Declaration Statements regarding FCC and industry Canada Manufacturer declarations