Sennheiser LV307, LV308 manual Slave

Using the receiver

Master

Slave

To copy the settings:

Place the receiver with “master” function above the infra-red interface of the other receivers (slaves), one after the other. The distance between the infra-red interfaces of both receivers (master and slave) must not exceed 10 cm.

The settings are copied and the text “COPY” briefly appears on the display of the receiver (slave). If data transfer was success- ful, the receiver (slave) switches off automatically.

Note:

Strong extraneous light may interfere with the data transfer via the infra-red interface. Therefore, position the receivers so that any possible interference caused by extraneous light is avoided. The arrow in the diagram on the left indicates the direction from which the IR radiation must impinge upon the receiver.

21