Using the receiver
Note:
It is only possible to switch the channel if the lock mode is deac- tivated. If it is deactivated, no lock mode icon appears on the display (see “Activating/deactivating the lock mode” on page 20).
Use the / rocker button (UP/DOWN) to switch between the 20 channels maximum.
The number of selectable channels might be limited when the operator has locked several channels (see “Locking channels for the user” on page 20). Locked channels are not displayed.
The receiver immediately switches to the new channel. If a transmission signal is received on the new channel the green LED lights up.
Attaching the receiver to clothing
The receiver is attached to clothing (e.g. belt, waistband) with the supplied belt clip.
The operating menu of the receiver
The operationg menu of the receiver consists of the user menu and the setup menu.
Within the user menu, the user can switch between the channels via the / rocker button (see “Switching the channel” on page 13).
Within the setup menu, the operator can configure the receiver for daily use.
SETUP | Configure the receiver |
| This section describes how to use the setup menu. An overview over |
| the menu is given within the chapter “The setup menu of the |
| receiver” on page 19. |
13
