Sennheiser LV307, LV308 manual Switching between channel banks, Bank U, Adjusting the sensitivity

Adjustment tips for the operating menu

	Adjustment tips for the operating menu
BANK	Switching between channel banks
	Via the “BANK” menu, you can switch between the transmitter’s
	nine channel banks. Each of the channel banks “1” to “8” has up to
	20 switchable channels that are factory-preset to a transmission
	frequency. The channel bank “U” (user bank) has up to 20 switcha-
	ble channels to store your selection out of 1440 transmission fre-
	quencies that are freely selectable within the preset frequency
	range.
	When switching from one channel bank to another, the channel
	with the lowest channel number is automatically displayed.
	Note:
	When using the transmitter with the tourguide system, the
	channel bank “8” must be selected.
CHAN	Switching between the channels in a channel bank
	Via the “CHAN” menu, you can switch between the different chan-
	nels in a channel bank.
TUNE	Selecting the frequencies to be stored in the channel
	bank “U”
	Via the “TUNE” menu, you can select the frequencies to be stored in
	the channel bank “U” (user bank).
	When you have selected one of the channel banks “1” to “8” and
	then select the “TUNE” menu, the transmitter automatically
	switches to channel 01 of the channel bank “U”.
	In this case, “U.01” briefly appears on the display.
	Use the / buttons to select the desired transmission fre-
	quency. Transmission frequencies are tunable in 25-kHz steps
	within a switching bandwidth of 36 MHz max. For intermodula-
	tion-free frequencies, please refer to the enclosed frequency
	table.
SENSIT	Adjusting the sensitivity
	Via the “SENSIT” menu, you can adjust the transmitter’s input sen-
	sitivity.

45