L 2015 quick charger
Preparing for use
Cascading several chargers
Make sure that the charger is disconnected from the mains.
Unscrew the two screws | at the right bottom side of the | |
charger. |
|
|
Slide the two rails | out of the guiding slots and screw them | |
tight using the two screws . | ||
Unscrew the two screws | at the left bottom side of the second | |
charger. |
|
|
Slide the second charger onto the rails of the first charger and screw the rails tight using the two screws .
Up to three chargers can be cascaded together with the rails and can by powered by a common mains unit..
Numbers of chargers | Mains unit requiredl |
1 | NT 1 |
up to 3 | NT 3 |
Setting up the charger
The charger has four plastic feet to ensure that it cannot slip on the surface on which it is placed.
CAUTION! Risk of staining of furniture surfaces!
Some furniture surfaces have been treated with var- nish, polish or synthetics which might cause stains when they come into contact with other synthetics. Despite a thorough testing of the synthetics used by us, we cannot rule out the possibility of staining.
Do not place the receiver on delicate surfaces.
Switching the charger on or off
To switch the charger on, insert the hollow jack plug on the cable of the mains unit (mains unit must be ordered separately) into socket .
Connect the mains unit to the mains.
All LEDs briefly light up one after the other.
24
