ZyXEL Communications 240B manual 4 LAN TCP/IP Setup Menu Fields, Wireless Setup

		ExpWave 240B Secure Outdoor Ethernet Radio Link
FIELD	DESCRIPTION		EXAMPLE
DNS Server
DHCP Server	If Relay is selected in the DHCP field above, then type the IP address of
Address	the actual, remote DHCP server here.

Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.

Table 5-4 LAN TCP/IP Setup Menu Fields

FIELD	DESCRIPTION	EXAMPLE
TCP/IP Setup:
IP Address	Enter the IP address of your ExpWavein dotted decimal notation	192.168.1.1
		(default)
IP Subnet Mask	Your ExpWavewill automatically calculate the subnet mask based	255.255.255
	on the IP address that you assign. Unless you are implementing	.0
	subnetting, use the subnet mask computed by the ExpWave.
RIP Direction	Press [SPACE BAR] and then [ENTER] to select the RIP direction.	Both
	Options are: Both, In Only, Out Only or None.	(default)
Version	Press [SPACE BAR] and then [ENTER] to select the RIP version.	RIP-1
	Options are:	(default)
	RIP-1,RIP-2B or RIP-2M.
IP Policies	You can apply up to four IP Policy sets (from twelve) by typing their	2,7,9,11
	numbers separated by commas.

When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [ESC] at any time to cancel.

Wireless Setup 5-5