ZyXEL Communications manual ExpWave 240B Secure Outdoor Ethernet Radio Link, Wireless Setup

ExpWave 240B Secure Outdoor Ethernet Radio Link

Menu 3 - LAN Setup

1.LAN Port Filter Setup

2.LAN DHCP Setup

Enter Menu Selection Number:

Figure 5-3 Menu 3 - LAN DHCP Setup

From menu 3, select the submenu option TCP/IP and DHCP Setup and press [ENTER]. The screen now displays Menu 3.2 — TCP/IP and DHCP Ethernet Setup, as shown next.

Menu 3.2 - TCP/IP and DHCP Ethernet Setup
	First address
DHCP= Server	in the IP Pool
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
	Size of the IP
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A	Pool
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1	IP addresses
	of the DNS
IP Policies= 2,7,9,11	servers
Press ENTER to Confirm or ESC to Cancel:

Figure 5-4 Menu 3.2 - LAN DHCP Ethernet Setup

Follow the instructions in the next table on how to configure the DHCP fields.

Table 5-3 DHCP Ethernet Setup Menu Fields

FIELD	DESCRIPTION	EXAMPLE
DHCP	This field enables/disables the DHCP server.	Server
	If set to Server, your ExpWave will act as a DHCP server.
	If set to None, the DHCP server will be disabled.
	If set to Relay, the ExpWave acts as a surrogate DHCP server and relays
	requests and responses between the remote server and the clients.
	When set to Server, the following items need to be set:
Configuration:
Client IP Pool	This field specifies the first of the contiguous addresses in the IP address	192.168.1.
Starting	pool.	33
Address
Size of Client	This field specifies the size, or count of the IP address pool.	32
IP Pool
Primary DNS	Type the IP addresses of the DNS servers. The DNS servers are passed
Server	to the DHCP clients along with the IP address and the subnet mask.
Secondary

5-4 Wireless Setup