ExpWave 240B Secure Outdoor Ethernet Radio Link
Chapter 11 System Maintenance
This chapter covers SMT menus 24.1 to 24.4.
This chapter covers the diagnostic tools that help you to maintain your ExpWave. These tools include updates on system status, port status and log and trace capabilities.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown below.
Menu 24 - System Maintenance
1.System Status
2.System Information and Console Port Speed
3.Log and Trace
4.Diagnostic
5.Backup Configuration
6.Restore Configuration
7.Upload Firmware
8.Command Interpreter Mode
10.Time and Date Setting
11.Remote Management Setup
Enter Menu Selection Number:
Figure 11-1 Menu 24 — System Maintenance
11.1 System Status
The first selection, System Status, gives you information on the version of your system firmware and the status and statistics of the ports, as shown in the next Figure
To get to the System Status:
Step 1. Enter number 24 to go to Menu 24 - System Maintenance. Step 2. In this menu, enter 1 to open System Maintenance - Status.
Step 3. There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the WAN connection, 9 resets the counters and [ESC] takes you back to the previous screen.
|
|
| Menu 24.1 - Router Mode System Maintenance - Status | |||||
Port | Status | TxPkts | RxPkts | Cols | Tx B/s | Rx B/s | Up Time | |
LAN | Down | 31421 | 27241 | 0 | 0 | 0 | 0:00:00 | |
WAN | 11M | 46054 | 64321 | 0 | 0 | 0 | 8:29:46 | |
Port | Ethernet Address | IP Address |
| IP Mask |
| DHCP | ||
LAN | 00:02:CF:95:18:51 | 192.168.80.217 | 255.255.255.0 | None | ||||
WAN | 00:02:CF:95:18:52 | 127.1.0.1 | 255.255.255.0 | None | ||||
Station | AC1 |
| AC2 |
|
|
|
| |
| Active |
| Disable |
|
|
|
| |
System up Time: | 8:32:30 |
|
|
|
| |||
CPU Load: | 1.13% |
|
|
|
|
| ||
Press Command:
COMMANDS:
Figure 11-2 Menu 24.1 - System Maintenance - Status
System Maintenance |
|
