ZyXEL Communications manual Wan Dhcp, ExpWave 240B Secure Outdoor Ethernet Radio Link

ExpWave 240B Secure Outdoor Ethernet Radio Link

Menu 24.4 - System Maintenance - Diagnostic

TCP/IP

1.Ping Host

2.WAN DHCP Release

3.WAN DHCP Renewal

4.Internet Setup Test

System

11. Reboot System

Enter Menu Selection Number:

Host IP Address= N/A

Figure 11-9 Menu 24.4 — System Maintenance — Diagnostic

11.4.1 WAN DHCP

DHCP functionality can be enabled on the LAN or WAN as shown in Figure 11-10 WAN & LAN DHCP. LAN DHCP has already been discussed. The ExpWave can act either as a WAN DHCP client (IP Address Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu 4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN Release and Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.

Figure 11-10 WAN & LAN DHCP

The following table describes the diagnostic tests available in menu 24.4 for your ExpWave and associated connections.

Table 11-4 System Maintenance Menu Diagnostic

FIELD	DESCRIPTION
Ping Host	Enter 1 to ping any machine (with an IP address) on
	your LAN or WAN. Enter its IP address in the Host IP
	Address field below.
WAN DHCP Release	Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal	Enter 3 to renew your WAN DHCP settings.
Internet Setup Test	Enter 4 to test the Internet setup. You can also test the
	Internet setup in Menu 4 - Internet Access. Please

11-6 System Maintenance