ExpWave 240B Secure Outdoor Ethernet Radio Link
9.2 Configuring a Filter Set
To configure a filter sets, follow the procedure below:
Step 1. Select option 21. Filter Set Configuration from the Main Menu to open Menu 21.
| Menu 21 - Filter Set Configuration | ||
Filter | Comments | Filter | Comments |
Set # | Set # | ||
1 | ______________ | 7 | ______________ |
2 | ______________ | 8 | ______________ |
3 | ______________ | 9 | ______________ |
4 | ______________ | 10 | ______________ |
5 | ______________ | 11 | ______________ |
6 | ______________ | 12 | ______________ |
Enter Filter Set Number to Configure= 0
Edit Comments=
Press ENTER to CONFIRM or ESC to CANCEL:
Figure 9-2 Menu 21 - Filter Set Configuration
Step 2. Select the filter set you wish to configure (no.
Step 3. Enter a descriptive name or comment in the Edit Comments field and press Enter.
Press [Enter] at the message: [Press ENTER to confirm] to open Menu 21.1 - Filter Rules Summary.
| Menu 21.1 - Filter Rules Summary |
|
# A Type | Filter Rules | M m n |
- -
1 | Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=53 | N D F |
2 | Y |
|
3 | Y |
|
4 | Y |
|
5 | Y |
|
6 | Y |
|
Enter Filter Rule Number
Figure 9-3 Menu 21.1 - Filter Rules Summary
9.3 Filter Rules Summary Menu
This screen shows the summary of the existing rules in the filter set. The following tables contain a brief description of the abbreviations used in Menu 21.1.
Table 9-1 Abbreviations Used in the Filter Rules Summary Menu
Abbreviations | Description | Display |
# | Refers to the filter rule number |
|
A | Refers to Active. | [Y] means the filter rule is active. |
|
| [N] means the filter rule is inactive. |
Type | Refers to the type of filter rule. | [GEN] for Generic |
| This shows GEN for generic, IP for | [IP] for TCP/IP |
| TCP/IP |
|
Filter Rules | The filter rule parameters will be |
|
| displayed here (see below). |
|
M | Refers to More. | [Y] means there are more rules to check. |
Filter Setup |
