ExpWave 240B Secure Outdoor Ethernet Radio Link
Step 5. Create a rule in menu 25.1.1 for this set to route packets from any host (IP=0.0.0.0 means any host) with protocol TCP and port FTP access through another gateway (192.168.1.100).
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set2 |
| |
Active= Yes |
|
|
Criteria: | = 6 |
|
IP Protocol | Packet length= 10 | |
Type of Service= Don't Care | ||
Precedence | = Don't Care | Len Comp= N/A |
Source: |
| end= N/A |
addr start= 0.0.0.0 | ||
port start= 0 | end= N/A | |
Destination: |
| end= N/A |
addr start= 0.0.0.0 | ||
port start= 20 | end= 21 | |
Action= Matched | =192.168.1.100 | Log= No |
Gateway addr | ||
Type of Service= No Change |
| |
Precedence | = No Change |
|
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
Figure 15-9 IP Routing Policy
Step 6. Check Menu 25.1 - IP Routing Policy Setup to see if the rule is added correctly. Step 7. Apply both policy sets in menu 3.2 as shown next.
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 64
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version=
IP Policies= 1,2
Press ENTER to Confirm or ESC to Cancel:
Figure 15-10 Applying IP Policie
IP Policy Routing |