ZyXEL Communications 240B manual 1/2/3/4

ExpWave 240B Secure Outdoor Ethernet Radio Link

FIELD	DESCRIPTION	EXAMPLE
	communicate with the Access Points without any data encryption.
	Select 64-bit WEP1 or 128-bit WEP to allow data encryption. Although
	WEP is functional at 5.5 and 11 Mbps, there is significant performance
	degradation when using WEP at these rates.
Default Key	This allows you to select one WEP key as an active key to encrypt	N/A / 1/2/3/4
	wireless data transmission.
Key1 to Key4	If you choose 64-bit WEP, then enter any 5 characters (ASCII string)	********
	or 10 hexadecimals digits (“0-9”, “A-F”) preceded by 0x for each Key
	(1-4).
	If you choose 128-bit WEP, then enter any 13 characters (ASCII
	string) or 26 hexadecimals digits (“0-9”, “A-F”) preceded by 0x for
	each Key (1-4).
	There are four data encryption keys to secure your data from being
	eavesdropped by unauthorized wireless users. The values must be
	set up exactly the same on the Access Points as they are on the
	wireless client stations. The same value must be assigned to Key 1
	on both the Access Point and the client adapters, the same value
	must be assigned to Key 2 on both the Access Point and the client
	stations and so on, for all four WEP keys.

When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.

6-2 Wireless Setup