ZyXEL Communications 240B Backup Via Console Port, 3 System Maintenance - Backup Configuration

ExpWave 240B Secure Outdoor Ethernet Radio Link

	computer.
Local File	Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom
	extension) on your computer.
Remote File	This is the filename on the ExpWave. The filename for the firmware is “ras” and for the
	configuration file, is “rom-0”.
Binary	Transfer the file in binary mode.
Abort	Stop transfer of the file.

12.2.8 Backup Via Console Port

Back up configuration via console port by following the HyperTerminal procedure shown next. Procedures using other serial communications programs should be similar.

Step 1. Display menu 24.5 and enter “y” at the following screen.

Ready to backup Configuration via Xmodem.

Do you want to continue (y/n):

Figure 12-3 System Maintenance — Backup Configuration

Step 2. The following screen indicates that the Xmodem download has started.

You can enter ctrl-x to terminate operation any time.

Starting XMODEM download...

Figure 12-4 System Maintenance — Starting Xmodem Download Screen

Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the following screen.

Type a location for storing the configuration file or click Browse to look for one.

Choose the Xmodem protocol.

Then click Receive.

Figure 12-5 Backup Configuration Example

Step 4. After a successful backup you will see the following screen. Press any key to return to the SMT menu.

**Backup Configuration completed. OK.

###Hit any key to continue.###

Figure 12-6 Successful Backup Confirmation Screen

12-4 Firmware & Configuration File Maintenance