Sennheiser LV307, LV308 manual Selecting the standard display, Entering a name

Adjustment tips for the operating menu

DISPLY	Selecting the standard display
	Via the “DISPLY” menu, you can select the standard display:

Selectable standard display

Contents of standard display

“FREQ“

“NAME“

“CHAN“

NAME	Entering a name
	Via the “NAME” menu, you can enter a freely selectable name for
	the transmitter. The name can be displayed on the standard display
	and can consist of up to six characters such as:
	y letters (without pronounciation marks),
	y numbers from 0 to 9,
	y special characters e.g. () - . _ and spaces.
	To enter a name, proceed as follows:
	After you have entered into the setting mode of the menu, the first
	segment starts flashing on the display.
	With the / buttons you can now select a character. By briefly
	pressing a button, the display jumps either forwards or back-
	wards to the next character. If you hold down a button, the dis-
	play starts cycling continuously.
	Press the SET button to change to the next segment and select
	the next character.
	Have you entered the name completely? Press the SET button to
	store your setting and to return to the top menu level.

RESET	Loading the factory-preset default settings
	Via the “RESET” menu, you can load the factory-preset default set-
	tings. Only the selected setting for the pilot tone remains
	unchanged. After the reset, the transmitter is restarted and the
	standard display is shown on the display panel.

47