Using the receiver
Using the receiver
Switching the receiver on/off
To switch the receiver on, turn the volume control clockwise until it clicks. The red LED lights up and the current number is displayed.
Note:
yThe receiver has a short
y Remove the batteries or the rechargeable battery when the receiver will not be used for extended periods of time.
To switch the receiver off, turn the volume control counter- clockwise until it clicks. The red LED and the standard display go off.
Note:
If you insert the active receiver into the L 2015 charger to recharge it, the receiver automatically gets off. It even remains inactivated when you take it out of the charger. Then you will have to primary switch it off and then on again as described above.
Adjusting the volume
You can adjust the volume at the headphone output on the trans- mitter.
CAUTION! Danger of hearing damage!
Listening at high volume levels for long periods can lead to permanent hearing defects.
Set the volume for the connected headphones to the minimum before putting the headphones on.
Adjust the volume of the connected headphones via the volume control button so that you can clearly and precisely under- stand the speaker.
Switching the channel
If several guided tours take place within a building and several transmission links are operated at the same time, the user can switch the channel of the receiver to the channel that is stated by the guide.
12
