Using the receiver

Adjustment tips for the setup menu

LOCK

￿

Activating/deactivating the lock mode

Via the “LOCK” menu, you can activate or deactiveate the lock mode. This mode locks the / rocker button (UP/DOWN) so that the user cannot change the preset channel.

The lock mode icon on the display of the user interface (user menu) indicates that the lock mode is activated.

To deactivate the lock mode you have to select “LOC.OFF“ within the menu “LOCK“ of the setup menu.

 

TUNE

Changing the receiving frequencies of the channels

 

 

Via the “TUNE“ menu you can change the receiving frequency of a

 

 

channel or you scan lock certain channels (see “Locking channels for

 

 

the user” on page 20).

 

 

16 of 20 channels do have factory-preset receiving frequencies.

 

 

These frequencies do not cause any intermodulation interferences

 

 

and they ensure a safe and trouble-free reception even if several

 

 

transmission links are operated simultaneously.

 

 

Note:

 

 

 

The receiving frequency of the receiver must exactly correspond

 

 

to the transmission frequency of the transmitter!

 

 

Select the “TUNE“ menu to change these frequencies or to enter

 

 

 

 

the receiving frequencies for the channels 17 to 20.

 

 

The current channel is flashes on the display.

 

 

Use the

/ rocker button (UP/DOWN) to select the channel

 

 

whose frequency you would like to change.

 

 

 

 

The selected channel flashes on the display.

 

 

Press the SET button to confirm your selection.

 

 

The current receiving frequency of the selected channel flashes

 

 

on the display.

 

 

Use the

/ rocker button to select the desired receiving fre-

 

 

 

 

quency. Receiving frequencies are tunable in 25-kHz steps

 

 

 

 

The selected receiving frequency flashes on the display.

 

 

Press the SET button to store the new receiving frequency.

 

 

 

 

TUNE

Locking channels for the user

 

 

Via the “TUNE“ menu you can lock certain channels so that the user

 

 

cannot select them. This makes sense when several guided tours

 

 

take place at the same time and several transmission links are oper-

18

Page 18
Image 18
Sennheiser LV308 Adjustment tips for the setup menu, Locking channels for the user, Activating/deactivating the lock mode