Jensen VM9423 operation manual Exiting the System Setup Menu

VM9423

RDS Sub-menu Features

Setting	Options	Function
Tuner	USA	FM Band: 87.9MHz -
Region	USA	107.9MHz, channel separation
		@ 200kHz
	Canada	AM Band: 530kHz - 1710kHz,
	Mexico
	South	channel separation @ 10kHz
	America
	Europe	FM Band: 87.6MHz -
	UK	107.9MHz, channel separation
		@ 100kHz
	Europe	AM Band: 531kHz - 1602kHz,
	Africa
		channel separation @ 9kHz

Rating Sub-menu Features

The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content. By default, the rating system is set at the highest setting (with no restrictions). The parental lock is released only by entering the correct password. Once the password is entered, rating is available for setup.

Setting	Options		Function
Password	_ _ _ _ _ _		Enter the default six-digit password
			(012345).
Rating	1. Kid Safe		Select the appropriate rating level
			for the intended audience.
	2.	G
			You may override higher ratings by
	3. PG
			using your password.
	4.	PG-13
	5. PG-R
	6.	R
	7.	NC-17
	8.	Adult
Load Factory	Reset		Select “Reset” to restore the factory
			default settings for the Rating sys-
			tem only.

To reset the password, access the “RATING” menu and enter the current password. Once the correct password is entered, you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is

unavailable. Some discs restrict only portions of the disc and the appropriate content will play. For details, please refer to the disc description.

Demo Sub-Menu Features

You can stop/run demonstration mode or turn Demo Auto Run on/off by choosing the “Demo” option from the SETUP MENU.

When "Demo Auto Run" is Off, you can select "Demo Mode > Run" to start Demo Mode. Demo Mode scrolls through the various source screens, simulating activity on the display. “Demo Mode” is discreetly displayed in yellow text (below the clock), to indicate the unit is in Demo Mode. To stop Demo Mode, press the upper-left quadrant of the TFT (Source select).

When “Demo Auto Run” is On, the unit will automatically display Demo Mode when powered on.

Hardware Sub-menu Features

If the rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside unit after ten seconds.

Setting	Options	Function
Camera In	Normal
	Mirror	Reverse the camera image as if
		looking through a rear-view mirror.
TFT Set	Auto	The TFT panel automatically opens
Open		when the unit is turned on.
	Manual	When the ignition is turned OFF, the
		TFT panel DOES NOT retract if it
		was previously out
	Off	You must press the OPEN button
		(1) to open the TFT panel.
TFT Set Back	Off	TFT screen remains fully extended.
	On	TFT screen moves back slightly
		after opening.
Auto Dimmer	Off	TFT screen brightness remains
		constant unless manually adjusted.
	On	TFT screen will automatically dim
		when less light is available.

If the monitor is in display mode, the monitor automatically switches to CAMERA mode upon reverse driving. When the reverse driving stops, the monitor returns to its original input mode.

P.VOL Sub-menu Features

Setting	Options	Function
Source	DISC	Choose a source for which you
		would like to increase the rela-
	RADIO
		tive volume (LEVEL).
	SD
		Use the +/- buttons to increase
	SAT
		or decrease relative volume for
	AUX 1	specified source up to 6 deci-
		bels.
	USB
	BT
	AUX 2
	iPod
	NAV

TS Cal (Screen Calibration)

To access the “Screen Calibration” function from the SETUP menu, select the “TS CAL” option.

After entering calibration mode, a crosshair appears in a corner quadrant of the screen. To begin calibration, press and hold the crosshair for one second until it moves to the next quadrant. Continue for each quadrant until the calibration is completed.

To exit without performing calibration, touch the BACK button.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the SETUP button (31) on the remote control or touch the BACK button on the screen.

11