Pioneer VSX-919AH-S manual Advanced Mcacc menu Automatic Mcacc Expert

The Advanced MCACC menu

Automatic MCACC (Expert)

If your setup requires more detailed settings than those provided in Automatically setting up for surround sound (Auto MCACC) on page 37, you can customize your setup options below. You can calibrate your system differently for up to six different MCACC presets1, which are useful if you have different listening positions depending on the type of source (for example, watching movies from a sofa, or playing a video game close to the TV).2

Important

•Make sure the microphone/speakers are not moved during the Auto MCACC Setup.

•Using the Auto MCACC Setup will

overwrite any existing settings for the MCACC preset you select.3

•The screen saver will automatically appear after five minutes of inactivity.

CAUTION

•The test tones used in the Auto MCACC Setup are output at high volume.

THX®

THX is a trademark of THX Ltd., which may be registered in some jurisdictions. All rights reserved.

10

1Select ‘Auto MCACC’ from the Advanced MCACC menu, then press ENTER.

If the Advanced MCACC screen is not

displayed, refer to Making receiver settings from the Advanced MCACC menu on page 76.

	1.Advanced MCACC
		A/V RECEIVER
a. Full Auto MCACC
b. Auto MCACC
c. Manual MCACC
d. Demo
				1b.Auto MCACC
				A/V RECEIVER
					Speaker Setting
			ALL
		SYMMETRY	: M1.MEMORY 1		Channel Level
					Speaker Distance
		ALL CH ADJ	: M2.MEMORY 2		EQ Pro & S-Wave
Exit		FRONT ALIGH: M3.MEMORY 3 Return
		THX Speaker	:	NO
				START
		Exit				Return

2Select the parameters you want to set. Use / to select the item, then use / to set.

		1b.Auto MCACC
		A/V RECEIVER
	ALL			Speaker Setting
SYMMETRY	: M1.MEMORY 1			Channel Level
				Speaker Distance
ALL CH ADJ	: M2.MEMORY 2			EQ Pro & S-Wave
FRONT ALIGH: M3.MEMORY 3
THX Speaker	:	NO		1b.Auto MCACC
		START
				A/V RECEIVER
			ALL		Speaker Setting
		SYMMETRY	: M1.MEMORY 1		Channel Level
					Speaker Distance
Exit		ALL CH ADJ	: M2.MEMORY 2 ReturnEQ Pro & S-Wave
		FRONT ALIGH: M3.MEMORY 3
		THX Speaker	:	NO
				START

Exit Return

Note

1These are stored in memory and referred to as MEMORY1 to MEMORY6 until you rename them in Data Management on page 90.

2You may also want to have separate calibration settings for the same listening position, depending on how you’re using your system.

3Except in cases where you are only adjusting one parameter (i.e. channel level) from the Auto MCACC menu (step 2).

77

En