Pioneer VSX-919AH-S 11The system and the other setup, 2Choose the set of speakers that you want

11The system and the other setup

2Select the surround back speaker setting.

•Normal – Select for normal home theater use with surround back speakers in your main (speaker system A) setup.

•Speaker B – Select to use the (surround back) B speaker terminals to listen to stereo playback in another room (see Switching the speaker system on page 68).

•Front Bi-Amp– Select this setting if you’re bi-amping your front speakers (see Bi- amping your speakers on page 20).

•ZONE 2 – Select to use the (surround back) B speaker terminals for an independent system in another zone (see Using the MULTI-ZONE controls on page 68).

3When ‘Setting Change?’ is displayed, select Yes.

If No is selected, the setting is not changed.

You will return to the Manual SP Setup menu.

Speaker Setting

Use this setting to specify your speaker configuration (size, number of speakers and crossover frequency)1. It is a good idea to make sure that the settings made in Automatically setting up for surround sound (Auto MCACC) on page 37 are correct. Note that this setting applies to all MCACC presets, and cannot be set independently.

1Select ‘Speaker Setting’ from the Manual SP Setup menu.

4a.Manual SP Setup

A/V RECEIVER

1.Surr Back System

2.Speaker Setting

3.Channel Level

4.Speaker Distance

5.X-Curve

			4a2.Speaker Setting
			A/V RECEIVER
	Front	:	LARGE
	Center	:	SMALL
Exit	Surr	:	SMALL
	SB	:	SMALL x 2
	SW	:	YES
	X.OVER :		80Hz
	Exit		Return

2Choose the set of speakers that you want

to set, then select a speaker size.

Use / to select the size (and number) of each of the following speakers:2

•Front – Select LARGE if your front

speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer. Select SMALL to send the bass frequencies to the subwoofer.

•Center – Select LARGE if your center speaker reproduces bass frequencies effectively, or select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect a center speaker, choose NO (the center channel is sent to the front speakers).

•Surr – Select LARGE if your surround speakers reproduce bass frequencies effectively. Select SMALL to send bass frequencies to the other speakers or subwoofer. If you didn’t connect surround speakers choose NO (the sound of the surround channels is sent to the front speakers or a subwoofer).

Note

1If you’re using a THX speaker setup, set all speakers to SMALL.

2If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround and surround back speakers can’t be set to LARGE if the front speakers are set to SMALL. In this case, all bass frequencies are sent to the subwoofer.

94

En