Pioneer VSX-919AH-S manual

• Check whether or not the connected component is compatible with HDCP. If it is not compatible with HDCP, reconnect the source device using a different type of connection (component or composite). Some components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video, this is not a malfunction.

HDCP ERROR shows in the display.

• Sometimes a video deck may output a noisy video signal (during scanning, for example), or the video quality may just be poor (with some video game units, for example). The picture quality may also depend on the settings, etc. of your display device. Switch off the video converter and reconnect the source and display device using the same type of connection (component or composite), then start playback again.

• If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support.

Noisy or distorted picture.

No sound, or sound suddenly • Check that the HDMI AV setting is set to AMP/THROUGH.

ceases.• If the component is a DVI device, use a separate connection for the audio.

• If analog video is being output over HDMI, please use a separate connection for the audio.

• Check the audio output settings of the source component.

• Try changing the Resolution setting (in Setting the Video options on page 66).

No picture.

• This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible. If they are not, please connect them using the component or composite video jacks.

• Depending on the connected source component, it’s possible that it will not work with this receiver (even if it is HDCP-compatible). In this case, connect using the component or composite video jacks between source and receiver.

• If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support.

• If video images do not appear on your TV or flat screen TV, try adjusting the resolution, DeepColor or other setting for your component.

• Try adjusting the resolution, DeepColor or other setting for your component.

• While analog video signals are being output over HDMI, use a separate connection for audio output.

• When this receiver reproduces MULTI CH IN audio sources with the HDMI setting set to THROUGH, you cannot hear audio output from all channels. In this case, make a digital or analog audio connection.

• To output signals in DeepColor, use an HDMI cable (High Speed HDMI™ Cable) to connect this receiver to a component or TV with the DeepColor feature.

No picture or sound.

• Check all the points below.

The HDMI indicator blinks continuously.

Remedy

HDMI

Symptom

Additional information

12

109

En