•To advance the remote access code number by increments of ten, press and hold the CHANGE key..
Answering System Operation At the Base
Setting Up Your Answering System
You can set up one feature at a time, or you can set up the first feature and then move on to set up the other features in sequence..
1.Make sure the answering system is on..
2.Press MENU until the system announces the feature you want to set.. Refer to the Feature Summary below for a description of the features and your choices..
3.Press CHANGE until the system announces the desired setting..
4.Press TIME/SET to confirm your selection.
5.Press MENU to move on to the next feature, or press PLAY/STOP to exit feature setup..
Feature Summary
Default settings indicated by * ..
| System Announces: | Description/Directions: | |
“Remote access code. To change the setting press | Set the remote access code you will use to | |
CHANGE.” | access features and functions of the answering | |
19* | system from a touch tone phone.. You can | |
select any two digit code, from 10 to 99.. | ||
| ||
|
| |
“Message alert. To change the setting press CHANGE.” | When message alert is turned on, the base | |
Off* | beeps once every 10 seconds when new | |
On | messages have been received.. | |
“Announcement only, record no messages. To | When you turn announce only on, callers | |
change the setting press CHANGE.” | hear your announcement, but cannot leave | |
On | a message.. | |
Off* |
|
28 BASIC OPERATION | www.vtechphones.com |
