Telephone Operation
When you have a message waiting, the handset will display:
MESSAGE WAITING
5/01 5:40PM
Clear Message Waiting Alert
If after you review your message(s) your message waiting alert does not go off, you may manually turn it off by:
1..Press PROG on the handset..
2..Press 
or 
until screen displays MESSAGE WAITING..
3..Press SELECT, the screen display: CLEAR? YES
4..Press 
or 
to change from YES to NO..
5..Press SELECT, you’ll hear a confirmation tone.
Call Transfer
An external call can be forwarded from one handset (HS1) to any other system handset (HS2 or HS3) by following these steps:
1.. While on a call, press select on HS1 to forward the call to HS2..
HS1 will show: | HS2 or HS3 will ring and show: |
CALL TRANSFERRED | TRANSFERRED CALL |
2.. Press PHONE on HS2 or HS3 to answer the forwarded call.. HS1 will return to the idle mode..
•Only one handset can be on a call at a time.. For example, if HS1 is on a call and HS2 or HS3 presses the PHONE button,
CAN’T CONNECT will display..
•If the HS2 or HS3 cannot be found, HS1 will generate a sad tone and continue the call automatically.. Before HS2 or HS3 answers, HS1 can press PHONE to cancel the forward function and continue the external call..
•If HS2 orHS3 doesn’t respond within 30 seconds, HS1 will start ringing until PHONE is pressed
t o p i c k u p t h e returned call.. If it is not answered within another 30 seconds, the external call will end automatically..
Basic Operation
www.vtechphones.com | BASIC OPERATION 13 |
