JVC RX-7032VSL manual Activating the DSP Modes, Select and play any sound source, Monaural Film

ALL Channel Stereo mode

This mode can reproduce a larger stereo sound field using all the connected (and activated) speakers. This mode cannot be used

without activating the surround speakers.

•If the front speakers are deactivated, “All Channel Stereo” cannot be selected.

Activating the DSP Modes

Activating one of the DSP modes for a source automatically recalls the memorized settings and adjustments (see pages 24 to 31.)

You can also use the buttons on the remote control for the same functions.

RX-7032V AUDIO/VIDEO CONTROL RECEIVER

Sound reproduced from normal stereo

Sound reproduced from All Channel Stereo mode

1.Select and play any sound source.

2.Press DSP repeatedly until the DSP mode you want appears on the display.

•Each time you press the button, the DSP modes change as follows:

	DIGITAL AUTO
L C	R	LINEAR PCM
SUBWFR	LFE	DIGITAL	DSP	SPEAKERS 1
LS	RS
				VOLUME

= HALL 1	= HALL 2	= LIVE CLUB
= DANCE CLUB = PAVILION		= ALL STEREO*
= THEATER 1	= THEATER 2	= MONO FILM**

=(Back to the beginning)

*When surround speakers are set to “NONE,” you cannot select “ALL STEREO.”

**When multi-channel signals come in, you cannot select “MONO FILM.”

Note:

When the surround speakers are deactivated, the 3D-PHONIC processing is applied to the DSP modes (the 3D-PHONIC indicator also lights up).

Monaural Film

In order to reproduce a more acoustic sound field in your listening room while viewing monaural sound video software (analog and 2- channel digital signals), you can use this mode.

The surround effect will be added, and the sound localization of actor’s words will be improved. This mode cannot be used for

multi-channel digital signals.

When “MONO FILM” is used, sounds come out of all the connected (and activated) speakers.

•If incoming signals change from 2-channel digital signal to another digital signal type, “MONO FILM” is canceled and an appropriate Surround mode is activated.

To cancel the DSP modes

Press SURROUND/DSP OFF (or SURR/DSP OFF on the remote control). “SURR OFF” appears on the display.

•When the front speakers are deactivated, “HEADPHONE” will appear.

37