Switching to a Program of Your
Choice Automatically
Another convenient RDS service is called “Enhanced Other Networks.”
This allows the receiver to switch temporarily to a broadcast program of your choice (TA, NEWS, and/or INFO) from a different source except in the following cases:
•When you are listening to
•When the last received FM station is a
•When the receiver is in standby mode.
Before you start, remember...
•The Enhanced Other Networks function is only applicable to preset FM stations.
•You can use the Enhanced Other Networks function while listening to any source. However, to use the RDS operation buttons on remote control, the remote control operation mode must be for the tuner operations mode (see page 40).
From the remote control ONLY:
Press TA/NEWS/INFO repeatedly to select the program type(s) you want.
•Each time you press the button, the program type(s) change, and the corresponding indicators light up on the display.
TA 
NEWS 
INFO 
TA/NEWS 
TA/INFO
OFF 
TA/NEWS/INFO 
NEWS/INFO 
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in the widest sense.
OFF: Cancels the Enhanced Other Networks function
When the current source is “FM”
When the current source is other than “FM”
CASE 3 | If a station starts broadcasting the program you | |
have selected while listening to current source is | ||
| ||
| other than “FM” |
When a station is or starts broadcasting the program you have selected, the receiver automatically switches to the station. The indicator of received PTY code starts flashing.
‘
When the program is over, the receiver goes back to the previously selected source, but still remains in Enhanced Other Networks standby mode. The indicator of received PTY code stops flashing and remains lit.
To stop listening to the program selected by the Enhanced Other Networks function
Press TA/NEWS/INFO repeatedly so that the program type (TA/ NEWS/INFO) indicator goes off from the display. The unit enters the Enhanced Other Networks function off mode and goes back to the previously selected source.
If an “Alarm!” (or TEST) signal is received from a station,
the receiver automatically tunes in the station from any source other than AM (MW).
•While receiving an emergency broadcast, “Alarm!” appears on the display.
The TEST signal is used for testing the “Alarm!” signal. Therefore, it makes the unit work in the same way as the “Alarm!” signal does.
Notes:
• | Enhanced Other Networks data sent from some stations may not |
| be compatible with this receiver. |
• | In Enhanced Other Networks standby mode, if you carry out |
| synchronized recording (see page 39), Enhanced Other Networks |
| standby mode is canceled temporarily. The receiver goes back to |
CASE 1
If the station currently tuned in starts broadcasting the program you have selected
Enhanced Other Networks standby mode again when the recording |
is finished. |
• While listening to a program tuned in by the Enhanced Other |
The receiver continues to receive the station, but the indicator of received PTY code starts flashing.
‘
When the program is over, the indicator of received PTY code stops flashing and remains lit, but the receiver remains in Enhanced Other Networks standby mode.
CASE 2 | If another FM station starts broadcasting the | |
program you have selected while you are | ||
| ||
| listening to an FM station |
The receiver automatically switches to the station. The indicator of received PTY code starts flashing.
‘
When the program is over, the receiver goes back to the station previously tuned in, but still remains in Enhanced Other Networks standby mode. The indicator of received PTY code stops flashing and remains lit.
Networks function, you can only use the DISPLAY MODE button as |
the tuner operation buttons. |
CAUTION:
When the source alternates intermittently between the station tuned in by the Enhanced Other Networks function and the currently selected source, press TA/NEWS/INFO repeatedly to cancel the Enhanced Other Networks function.
If you do not press the button, the currently tuned station is received finally, and one of the TA/NEWS/INFO indicators flashing on the display disappears.
23
