To change the transmittable signals for operating another manufacturer’s DVD player
1.Press and hold AUDIO 
.
2.Press DVD.
3.Enter a manufacturer’s code using buttons 1–9,
and 0.
See the list on the right column to find the code.
4. Release AUDIO 
.
After pressing DVD or DVD MULTI, you can perform the following operations on a DVD player:
3: Start playing.
4: Return to the beginning of the current (or previous) chapter.
¢: Skip to the beginning of the next chapter.
7: Stop playing.
8: Pause playing. To resume, press 3.
| For DVD player | |
|
|
|
Manufacturer |
| Codes |
|
|
|
JVC |
| 00*, 02 |
Denon |
| 01 |
Panasonic |
| 03 |
Philips |
| 13 |
Pioneer |
| 04, 05, 06 |
RCA |
| 07 |
Samsung |
| 08 |
Sony |
| 09 |
Toshiba |
| 10 |
Yamaha |
| 11, 12 |
*Initial setting
Manufacturers’ codes are subject to change without notice. If they are changed, this remote control cannot operate the equipment.
After pressing DVD or DVD MULTI, these buttons can be used for the DVD menu operations.
2 
3
MENU
Note:
4
56
ENTER
For detailed menu operations, refer to the
instructions supplied with the discs or a DVD player.
8
5.Try to operate your DVD player by pressing one of the above buttons.
•DO NOT forget to turn on the DVD player before pressing one of the above buttons.
If there are more than one code listed for your brand of
DVD, try each one until the correct one is entered.
46
