Concord Camera 4060 AF manual Taking a Picture with the LCD AT Distant Mode, AUTO-FOCUS Lock

TAKING PICTURES

TAKING A PICTURE WITH THE LCD AT DISTANT MODE

4M	28/45	CAMERA
		CAPTURE MODE
	Q	QUALITY SETUP
A		IMAGE SIZE
		SCENE SELECTION
AWB	N	WHITE BALANCE
07 ⁄ 04 ⁄ 03 02:40PM		RETURN	SELECT

CAPTURE MODE

SINGLE SHOT

CONTINUOUS SHOT SELF-TIMER

RETURN OK SET

Taking a picture with the LCD:

1.Set the camera to ( ) camera mode and make sure the Macro Switch is set to the ( ) Distant Mode.

2.Frame the subject in the LCD.

3.Press the shutter button half-way to activate the auto-focus lock until the green AF LED lights up. (For more information on Focus Lock, please go to page 12) (fig.1.1)

•The camera will focus the lens at different distances to find the correct focus range, and you will hear a rapid click sound from the camera.

4.Press the shutter button fully to capture the image. (fig.1.2)

•The camera will beep when the image is captured if sound is activated.

•The camera will make a click sound.

•When the image has been captured, the Flash Ready LED next to the viewfinder will blink to indicate that the image is being stored.

•A preview of the image will be displayed on the LCD for 1 second and the picture counter number displayed in the LCD will be updated.

4	28/45
	N
fig.1.1
4	28/45
	N
fig.1.2

AUTO-FOCUS LOCK

This feature can be used to freeze the focus when the subject is not located in the center of the picture at ( ) Distant Mode.

To use the focus lock:

1.Position the subject in the center of the red frame located in the LCD. (fig.1.3)

2.Press the shutter button halfway until the green Auto Focus LED lights up. (fig.1.4)

fig.1.5 fig.1.6

Auto Focus LED Status	Description
Blinking (fig.1.5)	The camera cannot find the best focus for the
	scene.
Steady (fig.1.6)	The subject is in focus.

4M 28/45

A

AWB N

07 ⁄ 04 ⁄ 03 02:40PM

fig.1.3

44	28/4528/45
fig.1.4

4M 28/45

A

AWB N

07 ⁄ 04 ⁄ 03 02:40PM

fig.1.7

12