Concord Camera 4060 AF manual Turning the Camera on and OFF, Checking the Battery Level

GETTING STARTED

TURNING THE CAMERA ON AND OFF

fig.1.1 Camera On fig.1.2 Camera Off

The Power Switch is located on the top of the camera.

1.Slide the Power Switch toward the ( ) icon to power the camera on. (fig.1.1)

•The lens cover will open.

•The LCD will turn on automatically

2.To turn the camera off, slide the Power Switch away from ( ). (fig.1.2)

Note:

To extend battery life, the camera will automaticallypower off after 60 seconds of inactivity. Press the Shutter button to turn the camera back on.

Checking the Battery Level

There are 5 battery levels that are displayed on the LCD

Batteries are full and ready to use.

3/4 battery

capacity remains.

1/4 battery

capacity remains. Batteries are low need to be replaced soon.

Batteries are

empty, blinking red and need to be replaced.

1/2 battery

capacity remains.

Note:

•The camera's battery level indicator may not accurately reflect the state of a rechargeable battery even the chargeable batteries have been fully recharged due to the inherent problem with rechargeable batteries.

•To extend battery life, the camera will automatically power off after 60 seconds of inactivity. To change this setting please refer to p.30.

•For better performance, please use NiMH rechargeable batteries.

•Remove the batteries from the camera if they will not be used for an extended period of time to prevent corrosion or battery leaks.

6