Concord Camera 4060 AF manual Macro Mode CLOSE-UP Shooting, How to use Self-Timer

TAKING PICTURES

SELF-TIMER

4M	28/45	CAMERA
		CAPTURE MODE
	Q	QUALITY SETUP
A		IMAGE SIZE
		SCENE SELECTION
AWB	N	WHITE BALANCE
07 ⁄ 04 ⁄	03 02:40PM	RETURN	SELECT

CAPTURE MODE

SINGLE SHOT CONTINUOUS SHOT

SELF-TIMER

RETURN OK SET

How to use Self-Timer:

1.In ( ) Camera Mode, press MENU to display the main menu.

2.Press the joystick to enter capture mode.

3.Press the joystick to highlight ( ) Self-Timer.

4.Press the OK button to set the ( ) Self-Timer.

5.Place the camera on a flat surface or tripod.

6.Use the LCD to compose the picture, and then press the Shutter button to activate the Self-Timer.

The Self -timer LED will blink slowly for 7 seconds, faster for the remaining 3 seconds and then the image will be captured.

Note:

•The Self-Timer is automatically deactivated once the image is taken.

•To deactivate the Self-Timer before taking a picture, follow the steps above and highlight another option in the Capture Mode menu.

Photography Hints -

Since the Self-Timer LED indicator on the front of the camera flashes, you have time to join in the photograph and know when the camera is done taking a picture when the Self-Timer LED light stops blinking.

MACRO MODE - CLOSE-UP SHOOTING

This mode enables the camera to capture pictures in close distances.

4M 28/45

A

AWB

07 ⁄ 04 ⁄ 03 02:40PM

N

Setting Macro Mode:

1.The Macro Mode Switch is located in the front of the camera. Slide the Macro Mode Switch to ( ) to set the Macro mode.

• The Macro icon ( ) will be displayed on the LCD.

Taking a picture in Macro Mode:

1.Frame the subject in the LCD.

•The best shooting distance is at 20 cm. (0.7 ft)

•Auto-focus is not available in Macro Mode. You can monitor the focus range through the LCD.

2.Press the Shutter button fully to take the picture.

17